loyalty is more important to client

Ac Repair In San Francisco

We at AC Repair In San Francisco offer our 100% Satisfaction Guarantee and our Lifetime Workmanship Warranty so that you can rest assured that you’re getting terrific service. We are available 24/7 so that in case your AC goes out in the middle of the night you can call us and get emergency air conditioning repair.


The most important maintenance task that will ensure the efficiency of your air conditioner is to routinely replace or clean its filters. Clogged, dirty filters reduce the amount of airflow and significantly reduce a system’s efficiency. In addition, when airflow is obstructed, air can bypass the filter and deposit dirt directly into the evaporator coil and  impair the coil’s heat-absorbing capacity. Replacing a dirty, clogged filter with a clean one can lower your air conditioner’s energy consumption by 5% to 15%.


For central air conditioners, filters are generally located somewhere along the return duct’s length. Common filter locations are in walls, ceilings, or in the air conditioner itself. Room air conditioners have a filter mounted in the grill that faces into the room.


Some types of filters are reusable; others must be replaced. They are available in a variety of types and efficiencies. Clean or replace your air conditioning system’s filter or filters every month or two during the cooling season. Filters may need more frequent attention if the air conditioner is in constant use, is subjected to dusty conditions, or you have fur-bearing pets in the house.


The air conditioner’s evaporator coil and condenser coil collect dirt over their months and years of service. A clean filter prevents the evaporator coil from soiling quickly. In time, however, the evaporator coil will still collect dirt. This dirt reduces airflow and insulates the coil, reducing its ability to absorb heat. To avoid this problem, check your evaporator coil every year and clean it as necessary.


Outdoor condenser coils can also become very dirty if the outdoor environment is dusty or if there is foliage nearby. You can easily see the condenser coil and notice if dirt is collecting on its fins.


You should minimize dirt and debris near the condenser unit. Your dryer vents, falling leaves, and lawn mower are all potential sources of dirt and debris. Cleaning the area around the coil, removing any debris, and trimming foliage back at least 2 feet (0.6 meters) allow for adequate airflow around the condenser.


The technician should:


  • Check for correct amount of refrigerant
  • Test for refrigerant leaks using a leak detector
  • Capture any refrigerant that must be evacuated from the system, instead of illegally releasing it to the atmosphere
  • Check for and seal duct leakage in central systems
  • Measure airflow through the evaporator coil
  • Verify the correct electric control sequence and make sure that the heating system and cooling system cannot operate simultaneously
  • Inspect electric terminals, clean and tighten connections, and apply a non-conductive coating if necessary
  • Oil motors and check belts for tightness and wear
  • Check the accuracy of the thermostat.